Preview CAMX 2024 technology before you go to the show!
When is CAMX?
September 9-12, 2024
Where is CAMX?
San Diego Convention Center, 111 W Harbor Drive
San Diego, CA 92101 USA
Where do I register for CAMX?
Click here to register
Will CompositesWorld be at CAMX?
Yes, the CW team will be at CAMX. Connect with us at Booth MM19.
CAMX 2025: Wisconsin Ovens presents equipment for vacuum bag, filament-wound and honeycomb block heating technologies, offered with a variety of specific features and options.
CAMX 2025: Eurovac’s objective is to design, develop and supply quality dust and fume extraction systems for customers, backed by a comprehensive facility, knowledgeable engineering team and growing distribution network.
CAMX 2025: Attendees are able to explore several of NIAR ATLAS’ prototype developments in person, highlighting tool-less space manufacturing, AI-enabled inspection and repair and thermoplastic overmolding.
CAMX 2025: The Aramis system by Trilion, based on DIC and photogrammetry technology, performs high-precision measurements in the sub-micrometer range, across a wide range of testing environments and material types.
CAMX 2025: AES is committed to driving technological advancement and application development in 3D printing, distinguishing its diverse capabilities through several tooling examples.
Researchers, engineers and industry professionals are now able to submit abstracts for CAMX 2025 Poster Sessions until May 30.
Interested companies and organizations can apply for the CAMX Award and the Awards for Composites Excellence (ACE) until June 13.
Connelly will bring her experience as a futurist and global consumer trends expert, equipping CAMX attendees with tools and strategies to navigate the global shifts in composites manufacturing.
Submit your technical paper and/or education session abstracts highlighting novel product developments, applications and research by Feb. 7, 2025.
The 2024 event saw an 11% increase in attendee traffic and exhibitor registration, supported by a comprehensive lineup of speakers, content and networking opportunities.
CAMX 2024: James Cropper, formerly known as Technical Fibre Products, is bringing its new name to the U.S. composites industry, highlighting its specialization in carrier, surface and fire protection veils, among other products.
CAMX 2024: Nanopoxy and Nione are presenting a session describing tests and results of incorporating niobium nanoparticles into epoxy resins.
CAMX 2024: General Plastics Manufacturing Co. returns with advancements to its Last-a-Foam tooling board foam and composite core products.
CAMX 2024: Web Industries’ Aerospace Business Unit is on-site to exhibit its various precision formatting offerings for composites manufacturers, in addition to supply chain and material management solutions.
CAMX 2024: Bally Ribbon Mills experts are displaying the company’s various joints, thermal protection system (TPS) technologies and other 3D woven composites for mission-critical applications.
CAMX 2024: Century Tool specializes in the in-house design, build and run-off of dimensionally large parts and Class A surface tooling.
CAMX 2024: A.P.C.M. highlights how its range of epoxy prepreg offerings undergo and surpass lighting strike testing.
CAMX 2024: Langzauner and Engel present combined systems for semi-finished composite processing in a single process step.
Addcomp and bespline are sister companies that offer innovative solutions for composites. This video from CAMX 2024 offers an overview of Addcomp’s AFP solutions.
Machine Tool Camp displayed its hybrid machining center at CAMX, featuring nine-axis machining capability enabled by robotics.
MachineTek showcases its precision fabrication of honeycomb materials at CAMX 2024.
Virtek Vision demonstrates its Iris AI technology at CAMX 2024. It combines laser projection with machine learning software to detect foreign object debris during a composite layup.
Rock West Composites’ chief strategy officer discusses recent surge in space applications on the CAMX 2024 show floor.
Westlake Epoxy’s process on display at CAMX 2024 reduces cycle time from hours to just 15 minutes.
Elevated Materials has partnered with Toray Composite Materials America, Inc. to collect and upcycle reclaimed carbon fiber scraps into large billet laminates, which can then be cut into various parts using CNC mills.
LestaUSA’s self-learning robots on display at CAMX 2024 enhance composites manufacturing workflow and workforce needs.
To wrap up another successful CAMX trade show, we give a second look at the ACE Award technologies, provide highlights of show floor activity, celebrate legacy CAMX exhibitors and more.
The second day of CAMX 2024 has all sorts of things in store for attendees, from Tuesday’s keynote centered around the world of AI, to award and poster session winners and what to look forward to at Good Day, CAMX on Thursday.
As a CAMX media partner, CW develops three show dailies throughout the week that report on interesting exhibitors and their technologies, events not to miss and more. Whether you’re attending the show, or watching from afar, make sure to tune in to these digital editions!
CAMX 2024 is right around the corner. Make sure to check out Part 2 of this two-part series highlighting some of the exhibitors you can expect to see in San Diego.
In the years since its establishment, CAMX has a lot to offer industry, merging industry segments and trends with a variety of networking and educational opportunities to provide a comprehensive platform that everyone can benefit from.
CW offers a preview of some of the software, materials, equipment and services that will be available to CAMX attendees in September.
CW’s Scott Francis interviews Cindy Squires, president/CEO, ACMA and Rebekah Stacha, CEO of SAMPE. They take a look back at the industry’s evolution the last 10 years, the opportunities CAMX will be providing to attendees and much more.
Need a compelling, unarguable reason to attend CAMX 2024 Sept. 9-12 in sunny San Diego? CW is here to help.
CAMX 2024: Magnum Venus Products (MVP) presents several automation solutions, including a self-learning robot, an IPD system and several live demonstrations of its products.
CAMX 2024: 3A Composites highlights the fire, smoke and toxicity (FST) properties, sustainability and customization of its Airex rigid foam core product line.
CAMX 2024: Across International is showcasing an array of heat and laboratory materials, including drying ovens, high-temperature furnaces and a bladeless mixing solution.
CAMX 2024: Crysound presents its CRY8120 series of acoustic imaging cameras, designed to detect gas leaks, identify electrical part discharge and monitor mechanical deterioration.
CAMX 2024: NitPro Composites features its customizable carbon fiber prepeg tubes for enhanced consistency, shearing, bending and compression properties.
CAMX 2024: Eastman Machine Co. showcases the Eagle C135, a computer-controlled conveyor and cutting system designed to cut a range of technical and industrial fabrics and composites.
CAMX 2024: Total Resin presents Total Nanotüp, a concentrated dispersion of carbon nanotubes in a bifunctional reactive monomer for polyester, vinyl ester, melamine and acrylic resins.
CAMX 2024: Matec Instrument Companies Inc. presents its range of nondestructive ultrasonic testing technologies, including robotic inspection systems for increased efficiency and reduced physical strain.
CAMX 2024: As a part of Composites One, Aerovac is committed to helping businesses with their composite solution needs to ensure precision, quality and efficiency in demanding manufacturing processes.
CAMX 2024: Stop by Composites One’s booth to see featured composite solutions, watch live demonstrations at the Demo Zone next door and better understand the level of technical support the distributor provides to composites customers.
CAMX 2024: Perlane Engineered Fastening Systems Division of Component Solutions Group works closely with engineering teams from initial design phase to prototyping and testing to meet a variety of project fastener needs.
CAMX 2024: Sheffield, a producer of highly accurate cutting machines, highlights its C-503 model machine made to cut carbon fiber, fiberglass and even natural fibers.
CAMX 2024: TCR Composites is a global prepreg supplier, offering continuous tow/roving, woven and stitched fabrics, braided sleeves and UD tapes.
CAMX 2024: On display at Extec’s booth is the Labcut 5000 precision composite plate saw, Nikon MA200 inverted metallurgical microscope and Labpol 12 automatic grinder/polisher.
CAMX 2024: Mito features E-Go graphene oxide for improved thermoset and thermoplastic properties, in addition to other additive solutions that are dispersible, safe to handle and scalable.
CAMX 2024: Imate Composites presents a variety of resins, fiberglass and roving products, as well as mats and catalysts.
CAMX 2024: IPCO highlights its novel precision scattering system designed to process recycled/reclaimed composite materials, as well as the multi-stage ThermoPress double-belt press.
CAMX 2024: Aeroadhere FAE-350-1, Park Aerospace’s curing modified epoxy, offers high toughness with elevated temperature performance when used in primary and secondary aerospace structures.
CAMX 2024: TruComposites and Evolv GMP digital manufacturing solutions by Magestic Technologies drive efficiencies and precision across composites manufacturing disciplines.
CAMX 2024: IST America presents a comprehensive selection of UV, IR and hot air technologies, designed to deliver results in less than a minute.
CAMX 2024: HK Research strives for innovation and customer satisfaction through meticulously produced polymers, liquid pigments and specialty additives and customer support.
CAMX 2024: Enhanced material performance and structural integrity, as well as reduced environmental impact is possible through Plasmatreat’s Openair-Plasma process.
CAMX 2024: Broetje-Automation’s Staxx family of AFP solutions create an ecosystem of functionality, versatility and scalable automation.
CAMX 2024: Tech Mark Inc. addresses sanding tool and abrasive material needs for any composites-related project.
CAMX 2024: Patcham USA displays a range of additive solutions for rheology modification, viscosity management, reinforcement wetting and more.
CAMX 2024: RTM North Ltd. presents Vac Pack, as well as its custom seals, tubes and fittings, to be used in composites RTM.
CAMX 2024: Sutherland Presses presents its durable servo hydraulic press, featuring the I-Press and automation Control system for operational consistency.
CAMX 2024: SensXPERT showcases the Digital Mold, integrating material characterization sensors directly into plastics and composites manufacturing processes for improved product quality and scrap reduction.
CAMX 2024: Concordia Engineered Fibers presents customizable commingled yarn solutions, including environmentally friendly options.
CAMX 2024: Subsystem provider PCX Aerosystem – Santa Ana highlights its execution of a variety of composite and hybrid composite/metallic programs for aerospace and space customers.
The Composites and Advanced Materials Expo’s 10th anniversary trade show and conference will be held in San Diego from Sept. 9-12, 2024.
CAMX 2024: North American Composites (NAC) presents its eCommerce platform for customer assistance, as well as its distribution of raw composite materials.
CAMX 2024: Century Design Inc. highlights its OnDemand towpreg systems, designed to provide differentiation and cost efficiency in-house while maintaining high quality.
CAMX 2024: In addition to its distribution of various product materials for the composites industry, Technology Marketing Inc. now assists in machined net-shaped Rohacell structural foam core to customer requirements.
CAMX 2024: Specialized portfolio of composite materials and engineered fiber solutions by Avient Corp. includes thermoplastics, thermosets and UD tape options.
CAMX 2024: SonicAire presents dust-control fans to simplify dust cleanup in fiberglass facilities using its high-velocity BarrierAire technology.
CAMX 2024: Schrödinger introduces a digital chemistry software platform, designed to enable researchers to tackle materials challenges across diverse polymer resin and carbon fiber applications.
CAMX 2024: Zoltek introduces PX35UD0300EPW and PX35UD0600EPW, carbon fiber fabrics providing easy handling that have the potential to meet the evolving needs of composite applications.
CAMX 2024: Kaneka Aerospace is demonstrating its novel diamine-based bis-benzoxazine resins, with features such as high char yield, for use as CFRP thermal protection.
CAMX 2024: MTS Systems showcases the Criterion 43 universal test system with a custom software interface, as well as composites testing fixtures and contact and noncontact extensometers.
CAMX 2024: Diab introduces sandwich panels that combine its structural foam core Divinycell F and thermoplastic skins, designed to meet current challenges in sustainability, REACH compliancy and more.
CAMX 2024: TeXtreme is showcasing its TeXtreme 0/90 woven fabrics, demonstrated through customer Kerberos Engineering’s satellite solar array.
CAMX 2024: Toray is showcasing its strength in composite material offerings, including a newly launched bio-based option, for aerospace, defense, recreation and industrial markets.
CAMX 2024: Johns Manville is presenting a range of fiber reinforcement solutions for thermoplastic and thermoset composites, including multi-end and single-end roving options.
CAMX 2024: Hexagon Purus showcases its portfolio of Type 3 and 4 COPVs which can be configured to meet a variety of needs.
CAMX 2024: Hawthorn Composites is displaying an inner and outer tail boom and a multi-chamber composite trailing edge control surface, enabled via its Smart Tooling solution.
CAMX 2024: Mikrosam highlights its filament winding automation, AFP and ATL, modular prepreg slitting and rewinding machine, and towpreg production lines for productivity and reduced costs.
CAMX 2024: Cevotec is introducing the Samba Pro PV-1 FPP system to attendees through a displayed cutout validated with partners and a conference presentation.
CAMX 2024: Thermwood Corp. is demonstrating several AM technology solutions through the LSAM AP 510 system and cut layer additive (CLA) process.
CAMX 2024: Wabash MPI/Carver Inc. highlight the Genesis Series of hydraulic presses, as well as a line of transfer presses, engineered for compression molding of various materials.
CAMX 2024: Polynt is demonstrating its halogen-free A 6104 A resin at the Composites One Demo Booth in the making of a battery tray using a silicone bag closed mold process.
CAMX 2024: Roth Composite Machinery is exhibiting its µRoWin winding software, amongst other product options like its automation concept for reliable fiber changing.
CAMX 2024: Vectorply Corp. displays a range of engineered reinforcements, including NCFs, needle-punched reinforcements, consumables and more, along with highlighting it technical support options.
CAMX 2024: Interplastic highlights its range of specialty resin offerings, as well as its advancements in R&D producing gelcoats, colorants, bonding compounds, adhesives and putties.
CAMX 2024: FKgroup showcases its solutions for cutting composite materials, focusing on sustainability and efficiency.
CAMX 2024: Accudyne Systems is highlighting its capabilities to develop, design, build and deliver custom composites equipment.
CAMX 2024: Arxada AG showcases its thermoset resins Primaset HTM-100 and Primaset HC for high temperatures, FST, dielectric properties and more.
CAMX 2024: Karl Mayer is returning to CAMX with a focus on fabric- and fiber-handling equipment, in addition to its application development services.
CAMX 2024: Sunrez Corp. presents its product line for UV curing, all crafted without VOCs or HAPs for reduced emissions.
CAMX 2024: Engineering Technology Corp. displays a range of products for composite part manufacturers, including tape wrapping machinery, automated workcells, winding software, tensioning creels, resin baths and more.
CAMX 2024: As an SMC product manufacturer, Molding Products LLC provides SMC formulations and technical support for diverse markets, from R&D to post-production.
CAMX 2024: L&L Products exhibits its InsituCore foaming core structural technology, which can be used to create foam core composites minus machining or presses, as well as the Phaster A K-700, a rapid-cure adhesive.
CAMX 2024: Radius Engineering showcases its Hybrid Composite Workcell with the versatility to support a range of closed-mold processes monitored by its Insights control system.
CAMX 2024: Pasquato exhibits its high-speed precision sheeters and slitter rewinders to enhance flexibility and material cutting quality.
CAMX 2024: Dantec Dynamics is presenting three of its laser shearography NDT and DIC devices, geared toward reliable measurement results.
CAMX 2024: Hawkeye Industries showcases its Duratec, Styrosafe, Styroshield and Aqua-Buff product lines for durable, high-gloss composite surfaces.
CAMX 2024: Taishan Fiberglass Inc., known globally as CTG International, is a high-capacity producer of various fiberglass composite materials, with a focus on ESG and low-carbon operations.
CAMX 2024: Pacific Coast Composites, backed by specialty chemicals distributor GracoRoberts, highlight combined expertise for comprehensive value-added services, products from more than 1,000 brands and a rapid e-commerce engine.
CAMX 2024: Addcomp distributes its AFP-XS systems and now adaptive molds, works with customers to design and install custom systems and develops its capabilities with new partnerships.
CAMX 2024: Plasma Bound’s CPA technology, powered by quality control system Vulcan, applies atmospheric pressure plasma to achieve high-level composite bonding.
CAMX 2024: 3M highlights the inclusion of Glass Bubble microspheres or the use of Nextel ceramic fibers and textiles to enhance the performance, safety and efficiency of customer applications.
CAMX 2024: Macrodyne engineers composites and rubber hydraulic presses for domestic and international customers, capable of handling large-scale production demands to more intricate projects.
CAMX 2024: Vartega is making carbon fiber more accessible to more industries through its fiber post-processing technology and EasyFeed Bundles.
CAMX 2024: Abaris Training Resources seeks to continually provide an ongoing educational experience for students — including a DVD repair course — and technical assistance to customers.
